Large Stock From China DC01 SPCC Cold Rolled Steel Strip

• Customization: Available
• After-sales Service: Contact Supplier
• Warranty: Contact Supplier
• Model NO.: Q235/Q235B/Q345/Q345B/SS400
• Standard: ASTM, JIS, GB, AISI, DIN, BS
• Certification: ISO
• Technique: Cold Rolled
• Application: Container Plate
• Edge: Slit edge
• Stock: Stock
• Thickness: 0.12-3.0mm
• Width: 600-1500mm
• Coil ID: 508mm/610mm
• Coil Weight: 3-5 Tons
• MOQ: 25 Tons
• Price Term: Fob CFR CIF
• Payment Term: T/T30% Deposit+70% Advance
• Processing Service: Welding, Punching, Cutting, Bending, Decoiling
• Hardness: Full Hard, Half Hard, Soft
• Tolerance: 1%
• Delivery Time: 15-21 Days
• Alloy or Not: Non-Alloy
• Grade: SPCC/DC01/St12/Spcd/Spce
• Usage: Building, Roofing Sheet, Safety Fence
• Sample: Free Sample Available
• Transport Package: Shipped by Vessel, Standard Export Package
• Specification: 0.12~2.0 mm *1000-1500mm
• Trademark: ZUNKAI
• Origin: Shandong
• HS Code: 720917
• Production Capacity: 100000 Tons Per Month

Product Description

 

Product Description

 

COLD ROLLED STEEL COIL

Product Name	Cold rolled steel coil	Packing	Standard export packing
Usage	building, roofing sheet, safety fence	Grade	SPCC/DC01/ST12/SPCD/SPCE
Standard	AISI/ASTM/JIS	Delivery Time	15-21 days
Place of Origin	Shandong,China	Technique	cold rolled
Width	600-1250mm	MOQ	5 tons
Thickness	0.15-2mm	Price Term	T/T, D/P, L/C, Cash

 

 

Cold-rolled coils refer to steel strips that are directly rolled to a certain thickness with rolls at room temperature and rolled into full coils with a winder. Compared with hot-rolled coils, cold-rolled coils have a brighter surface and a higher finish, but produce more internal stress, and are often annealed after cold-rolling.

 

Detailed Photos

Cold rolling: use hot-rolled steel coils as raw materials, pickle to remove scale, and then carry out continuous cold rolling. The finished product is hard rolled coils. Due to cold hardening caused by continuous cold deformation, the strength, hardness, and toughness of hard rolled coils increase. The plastic index decreases, so the stamping performance will deteriorate, and it can only be used for parts with simple deformation. Hard-rolled coils can be used as raw materials for hot-dip galvanizing plants, because hot-dip galvanizing units are equipped with annealing lines. The weight of hard-rolled coils is generally 6-13.5 tons, and the steel coils are continuously rolled at room temperature for hot-rolled pickled coils. The inner diameter is 610mm.

Cold rolled coil is hot rolled coil as raw material, at room temperature, the highest grade EDDQ, the highest strength of 590MPa, has the advantages of high dimensional
accuracy, good surface quality, convenient processing, material saving and so on. It is widely used in home appliance industry, automobile industry, machinery industry,
construction industry, galvanized and other industries.  
 

Chemical Properties of Frequently-used Stainless Steel Material Grade
UNS	ASTM	EN	JIS	C%	Mn%	P%	S%	Si%	Cr%	Ni%	Mo%
S20100	201	1.4372	SUS201	≤0.15	5.5-7.5	≤0.06	≤0.03	≤1.00	16.0-18.0	3.5-5.5	-
S20200	202	1.4373	SUS202	≤0.15	7.5-10.0	≤0.06	≤0.03	≤1.00	17.0-19.0	4.0-6.0	-
S30100	301	1.4319	SUS301	≤0.15	≤2.00	≤0.045	≤0.03	≤1.00	16.0-18.0	6.0-8.0	-
S30400	304	1.4301	SUS304	≤0.08	≤2.00	≤0.045	≤0.03	≤0.75	18.0-20.0	8.0-10.5	-
S30403	304L	1.4306	SUS304L	≤0.03	≤2.00	≤0.045	≤0.03	≤0.75	18.0-20.0	8.0-12.0	-
S30908	309S	1.4833	SUS309S	≤0.08	≤2.00	≤0.045	≤0.03	≤0.75	22.0-24.0	12.0-15.0	-
S31008	310S	1.4845	SUS310S	≤0.08	≤2.00	≤0.045	≤0.03	≤1.50	24.0-26.0	19.0-22.0	-
S31600	316	1.4401	SUS316	≤0.08	≤2.00	≤0.045	≤0.03	≤0.75	16.0-18.0	10.0-14.0	2.0-3.0
S31603	316L	1.4404	SUS316L	≤0.03	≤2.00	≤0.045	≤0.03	≤0.75	16.0-18.0	10.0-14.0	2.0-3.0
S31703	317L	1.4438	SUS317L	≤0.03	≤2.00	≤0.045	≤0.03	≤0.75	18.0-20.0	11.0-15.0	3.0-4.0
S32100	321	1.4541	SUS321	≤0.08	≤2.00	≤0.045	≤0.03	≤0.75	17.0-19.0	9.0-12.0	-
S34700	347	1.455	SUS347	≤0.08	≤2.00	≤0.045	≤0.03	≤0.75	17.0-19.0	9.0-13.0	-
S40500	405	1.4002	SUS405	≤0.08	≤1.00	≤0.04	≤0.03	≤1.00	11.5-14.5	≤0.60	-
S40900	409	1.4512	SUS409	≤0.08	≤1.00	≤0.045	≤0.03	≤1.00	10.5-11.75	≤0.50	-
S43000	430	1.4016	SUS430	≤0.12	≤1.00	≤0.040	≤0.03	≤0.75	16.0-18.0	≤0.60	-
S43400	434	1.4113	SUS434	≤0.12	≤1.00	≤0.040	≤0.03	≤1.00	16.0-18.0	-	-
S44400	444	1.4521	SUS444L	≤0.025	≤1.00	≤0.045	≤0.03	≤1.00	17.5-19.5	≤1.00	-
S40300	403	-	SUS403	≤0.15	5.5-7.5	≤0.04	≤0.03	≤0.50	11.5-13.0	≤0.60	-
S410000	410	1.40006	SUS410	≤0.15	≤1.00	≤0.035	≤0.03	≤1.00	11.5-13.5	≤0.60	≤1.00
S42000	420	1.4021	SUS420J1	0.16~0.25	≤1.00	≤0.04	≤0.03	≤1.00	12.0-14.0	≤0.75	≤1.00
S440A	440A	1.4028	SUS440A	0.60~0.75	≤1.00	≤0.04	≤0.03	≤1.00	16.0-18.0	-	≤0.75
S32750	SAD2507	1.441		≤0.03	≤1.2	≤0.035	≤0.02	≤0.80	24.0-26.0	6.0-8.0	3.0-5.0
S31803	SAF2205	1.4462		≤0.03	≤2.0	≤0.03	≤0.02	≤1.00	21.0-23.0	4.0-6.5	2.5-3.5
N08904	904L	1.4539		≤0.0.3	≤2.0	≤0.035	≤0.03	≤1.00	18.0-20.0	23.0-25.0	3.0-4.0

 

 Some of our products:
Because it has not been annealed, its hardness is very high (HRB is greater than 90), and its machinability is extremely poor. It can only perform simple directional bending of less than 90 degrees (perpendicular to the coiling direction). To put it simply, cold rolling is processed and rolled on the basis of hot rolled coils. Generally speaking, it is a process of hot rolling → pickling → cold rolling.

The difference between cold plate and hot plate:
1. Appearance and surface quality: Since the cold plate is obtained by the hot plate after the cold rolling process, and some surface finishing will be carried out at the same time, the surface quality (such as surface roughness) of the cold plate is better than that of the hot plate. It came well, so if there is a high requirement for the coating quality such as the subsequent painting of the product, the cold plate is generally selected, and the hot plate is divided into pickled plate and un-picked plate. The surface of the pickled plate is formed due to pickling. Normal metallic color, but it is not cold-rolled, so the surface is still not as high as the cold plate. The surface of the un-pickled plate usually has an oxide layer, black, or there is a black layer of ferric oxide. Generally speaking, it looks like it has been baked by fire. , and if the storage environment is not good, it usually has a little rust.
2. Performance: In general, the mechanical properties of hot plates and cold plates are considered to be indistinguishable in engineering, although there is a certain work hardening of cold plates in the cold rolling process, (but the strict requirements on mechanical properties are not ruled out. , then it needs to be treated differently), the yield strength of the cold plate is usually slightly higher than that of the hot plate, and the surface hardness is also higher, the specific way depends on the degree of annealing of the cold plate. But in any case, the strength of the annealed cold plate is higher than that of the hot plate.
3. Forming performance. Since the performance of cold and hot plates is basically not too different, the influencing factors of forming performance depend on the difference in surface quality. Since the surface quality is better from cold plates, generally speaking, the same material Steel plate, the forming appearance effect of cold plate is better than that of hot plate.

Customer reviews

One-stop service

Jinan Zunkai Materials Co., Ltd belongs to the Jinan Jinhongtong Steel Group.

Jinan Zunkai Materials was founded in 2016, our group include seven branch trade companies and one steel manufacturer factory.

Our annual sales amount has over one billion.

 

Advanced processing line

Our company mainly engaged in: PPGI, roofing sheet, galvalume steel coil, hot rolled steel plate, stainless steel, angle bar, round steel, aluminum sheet / coil /plate and all profiles.

We always focus on honest, trust and sincerity, wish good cooperation with all our clients.

 

Sales service 

The company relies on strong financial strength, advanced management experience, excellent sales services, strict quality management system and scientific overall marketing to go hand in hand with you for common development.

Hope to establish long-term cooperative relations with you.

 

Quality Testing

 

Application

Packaging & Shipping

Company Profile

Jinan Zunkai Group founded in 2002, with five branch companies and is well-funded. Our annual sales nearly one billion, about 300,000 tons steel.

Our company is located in Jinan City, Shandong Province. We entered into a strategic partnership with Bao Steel, Laiwu Steel, Rizhao Steel, Handan Steel, Anyang Steel, Maanshan Steel and other domestic large steel companies.

Zunkai is the largest steel agent in Shandong Province, we also have ourselves steel process factory with 100000 Square meter for steel laser cutting, surface treatment and other further processing , and our stock always more than 20,000 tons.

Zunkai Group mainly engaged in : PPGI ,galvanized steel , steel plate , round bar, steel pipe ,Stainless steel product ,angle bar, steel pile ,H beam ,I beam, angle, Channel flat steel etc .

Our good quality and reliable service will be your best trusted partner.

Sincerely wish to building long and regular business with you forever!!!

 

Customer Question & Answer

 

Q1 : What is your payment terms?
A1 : 30% deposit & balance against B/L or L/C at sight.
 

Q2 : What is your delivery time & loading port?
A2 : Generally it is within 7 days after received advance payment or L/C. If the goods is not in stock , according to the quantity
it is within 15 days. Loading port:QINGDAO or TIANJIN.

Q3 : Do you have MOQ request ? Can offer free samples?
A3 : Our MOQ is usually ONE ton. Free samples is ok but need pay thecourier charge. Charge can be deduct in future orders.

Q4 : What are your company's main products?
A4 : Our main products are Aluminum products, Steel products, Stainless steel products, Galvanized steel products, Colorized steel Coil, etc.

Q5 : Are you a factory or trading company?
A5 : We have both factory and trading company,own branch factory and warehouse in Shandong Province to provide you nice
goods with best price and good quality.