| Product Name |
Cold Rolled/ Hot Rolled Carbon Steel Sheet/Plate |
| Standard |
AISI,ASTM,DIN,JIS,GB,JIS,SUS,EN,etc. |
| Material |
Q195, Q215,Q235,Q345,ST37, A36,45# ,16Mn, SPHC,SGCC,CGCC |
| Thickness(mm) |
Hot Rolled Thickness:2.75mm-100mm
Cold Rolled Thickness:0.2mm-3mm
As Your Request |
| Width(mm) |
45mm-2200mm, As Your Request |
| Length |
1-12m,as Your Request |
| Technique |
Hot rolled / cold rolled |
| Surface |
Bare,Black,Oiled,Shot Blasted,Spray Paint,Coated,Galvanized,or as Your Request |
| Coil ID |
508-610mm or as per your request |
| Coil Weight |
3~5 Tons for as per your request |
| Application |
Construction, machinery manufacturing, container manufacturing, ship building, bridges, etc. |
| Packing |
Standard Export packing(Plastic film in the first layer,second layer is Kraft paper. Third layer is galvanized sheet) |
The checkered steel plate can be used as floors, factory escalators, working frame pedals, ship decks, and automobile floor plates because of its ribbed surface and anti-skid effect.
The specification of checkered steel plate is represented by the basic thickness (the thickness of the rib is not counted), and there are 10 specifications of 2.5-8 mm. Checker plate steel plate with No. 1-3.
Class B ordinary carbon structural steel is rolled, and its chemical composition meets the requirements of GB700 "Technical Conditions for Ordinary Carbon Structural Steel".
The height of the checkered plate is not less than 0.2 times the thickness of the base plate;
Checkered steel plate is delivered according to actual weight or theoretical weight;
Marking example: made of Q235-A, the size is 4*1000*4000mm.
Bean pattern steel plate, marked as: Pea pattern steel plate Q235-A-4*1000*4000-GB/T 3277-91
Diamond pattern steel plate, marked as: Diamond pattern steel plate B 3-4*1000*4000-GB 3277-82
Steel plates are delivered in a hot-rolled state;
There must be no air bubbles, scars, cracks, folds and inclusions on the surface of the checkered steel plate, and the steel plate must not be delaminated.
There are two levels of surface quality:
Ordinary precision: The surface of the steel plate is allowed to have a thin layer of iron oxide scale, rust, surface roughness and other local defects whose height or depth exceeds the allowable deviation due to the peeling off of the iron oxide scale.
Inconspicuous burrs and individual traces whose height does not exceed the grain height are allowed on the pattern. The maximum area of a single defect shall not exceed the square of the grain length.
Higher precision: The surface of the steel plate is allowed to have a thin layer of iron oxide scale, rust and other local defects whose height or depth does not exceed half of the thickness tolerance.
The pattern is intact, and the pattern is allowed to have local slight burrs whose height does not exceed half of the thickness tolerance.
CHECKERPLATEED STEEL COIL/
Checkered steel plate is a steel plate with a raised (or recessed) pattern on the surface. The pattern is lentil-shaped, diamond-shaped, round bean-shaped, and mixed flat and round shapes. The lentil shape is the most common in the market. The pattern can be a single diamond, lentil or round bean shape, or a combination of two or more patterns to become a combined pattern plate.
DEATAIL SHOW
FAQ
Q: Will the Test Certificate meet EN10204 3.1?
A: We will provide Original Mill Test Certificate certified to EN10204 3.1 for products in stock or further processing needed
Q: Once the products received by customer were found not comply with the products or contract demands, what will you do?
A: We will compensate the customer for all the loss without any hesitation
Q: How long is your delivery time?
A: Generally it is 3-5 working days if the goods are in stock or it will need 7-20 working days if the goods need to be customized
Q: Do you provide samples ? Is it free or extra ?
A: Yes, we could offer free samples, the customer need pay freight cost.
Q: What is your terms of payment?
A: 30% deposit in advance and balance see B/L copy or balance by L/C at sight.
Q What is your MOQ?
A. Carbon steel products are generally 25 tons.
B. High-value products such as stainless steel and copper pipes can be 1-5 tons according to the actual situation.
C. Carbon steel goods can be made with less demand, but the unit price is much higher.
Audited Supplier 
){kind=link}
){kind=link}