Steel wire rod
There are many varieties of wire rod. Carbon steel wire rod in the low carbon steel wire commonly known as soft wire, medium and high carbon steel wire commonly known as hard wire. Wire rod is mainly used as drawing blank, but also directly used as building materials and machine parts. Our company sells hot-rolled low carbon steel wire rod, ASTM A510/A510M standard, material SAE1006 SAE1008-SAE1022, diameter 5.5-19mm, single specification 200 tons minimum order.
Steel wire rod, is a commonly used name in construction projects. It refers to steel bars with a diameter of 5-19mm. Because steel bars with a diameter of less than 10 mm are easy to bend, in order to reduce the length before transportation, the manufacturer will The steel bars are rolled into rings. On construction sites, such steel bars are simply called discs.
Product Parameters
|
Products
|
wire rod
|
|
Variety
|
Soft wire,hard wire,spring wire,electrode wire,cold heading wire,electrolytic wire,welding wire etc
|
|
Size
|
0.03-18.0MM Special specifications can also be produced according to drawing and sample
|
|
Material Grade
|
SAE1006-1080,WA1010,Q195,SWRH32-37,SWRH42A-77A,SWRH42B-82B
|
|
Technique
|
Hot rolled
|
|
Application
|
wire-drawing, weaving of wire mesh, soft pipe, bean of cabinet, steel wire,ect
|
The allowable deviation of the STEEL WIRE diameter of 6-10mm is plus or minus 0.40, and the allowable deviation of out-of-roundness is less than or equal to 0.50. The surface of the steel wire rod must not have cracks, folds, etc. Indentations, local bumps, concave blocks, scratches, pits, etc. are allowed. , but its attempted (actual size) is not larger than 0.2mm. The surface of the disk is iron oxide scale, also known as the decarburized layer. The color is dark . When observed with the naked eye, the heavier the color, the better the texture.
High-strength prestressed steel wire is an economical and efficient steel material with high tensile strength and yield strength, good plasticity, and low relaxation performance. It is widely used in the construction of cement products, bridges, nuclear power plants, high-rise long-span buildings, highways, etc.
Wire rod is round steel with a relatively small diameter. The product form is rolled into a coil and supplied. Common ones on construction sites are 6, 8, 10, and 12 mm in diameter. They are mostly made of low carbon steel and are generally not used for the main bars of reinforced concrete structures. , mostly used to make steel bar sleeves, and small-diameter ones are used for "brick reinforcement" in brick-concrete structures.
Details Show
Type
There are many varieties of wire rod. Among carbon steel wire rods, low carbon steel wire rods are commonly known as soft wires, while medium and high carbon steel wire rods are commonly known as hard wires. Wire rod is mainly used as blank for drawing, and can also be directly used as building materials and processed into mechanical parts. Stainless steel wire rod is used to make stainless steel wire, stainless steel spring steel wire, stainless steel upset steel wire and stainless steel wire rope. With the advancement of production technology, square,
Hexagonal, sector-shaped and other special-shaped wire rods; the upper limit of diameter has been expanded to 38 mm; the plate weight has increased from the original 40-60 kg to 3,000 kg. Due to the development of a new post-rolling heat treatment process, the iron oxide scale on the surface of the wire rod has been significantly thinned, and the structural properties have also been greatly improved.
Product Application
Wire rods need to be straightened and cut using a steel bar straightening machine before use. At the same time, the oxidized scale is removed in the machine, and the strength is improved to a certain extent during repeated bending and stretching. For small construction sites that do not have a straightening machine, it is not advisable to use a winch to straighten the wire rod. Direct pulling is not advisable as it may easily cause too much plastic deformation. A pulley weight should be used at one end to control the pulling force.
Company Profile
Jinan Zunkai Group founded in 2002, with five branch companies and is well-funded. Our annual sales nearly one billion, about 300,000 tons steel. Our company is located in Jinan City, Shandong Province. We entered into a strategic partnership with Bao Steel, Laiwu Steel, Rizhao Steel, Handan Steel, Anyang Steel, Maanshan Steel and other domestic large steel companies.
Zunkai is the largest steel agent in Shandong Province, we also have ourselves steel process factory with 100000 Square meter for steel laser cutting, surface treatment and other further processing, and our stock always more than 20, 000 tons.
Sincerely wish to building a long regular business with you forever!
Pre-sale service:
1.Sample can be offered with courier fee by buyer's side.
2.We have full stock,and can deliver within short time.Many styles for your choices.
3. Good Quality + Factory Price + Quick Response + Reliable Service, is what we are trying best to offer you
4. All of our products are produce by our professional workman and we have our high-work-effect foreign trade team, you can totally believe our service.
5. We have 8 year experience of manufacture and sell steel, we cherish every order from our honor.
After sale Services:
1. We will count cheapest shipping cost and make invoice to you at once.
2. Check quality again, then send out to you at 1-2 working day after your payment,
3. Email you the tracking no, and help to chase the products until it arrive you.
4.We are very glad that customer give us some suggestion for price and products.
5. If any question,please contact me in your free time.
Audited Supplier 
){kind=link}
){kind=link}