Product Description
COLD ROLLED STEEL COIL
Cold rolling: use hot-rolled steel coils as raw materials, pickle and remove scale, and then carry out cold rolling. The finished product is hard rolled coils.
The strength, hardness, and toughness of hard rolled coils increase due to cold hardening caused by continuous cold deformation. The plastic index decreases, so the stamping performance will deteriorate, and it can only be used for parts with simple deformation.
Hard-rolled coils can be used as raw materials for hot-dip galvanizing plants, because hot-dip galvanizing units are equipped with annealing lines. The weight of hard-rolled coils is generally 6-13.5 tons, and the steel coils arecontinuously rolled at room temperature for hot-rolled pickled coils. The inner diameter is 610mm.
| Product Name |
Cold rolled steel coil |
Packing |
Standard export packing |
|
Usage
|
building, roofing sheet, safety fence |
Grade |
SPCC/DC01/ST12/SPCD/SPCE |
|
Standard
|
AISI/ASTM/JIS |
Delivery Time |
15-21 days |
| Place of Origin |
Shandong,China |
Technique |
cold rolled |
| Width |
600-1250mm |
MOQ |
5 tons |
| Thickness |
0.15-2mm |
Price Term |
T/T, D/P, L/C, Cash |
Cold Rolled Steel Coil Production Process
Since there is no heating during the production process, there are no defects such as pits and scales that often occur in hot rolling, and the surface quality is good and the finish is high. Moreover, the dimensional accuracy of cold-rolled products is high, and the performance and structure of the products can meet some special requirements, such as electromagnetic properties, deep drawing properties, etc.
Cold rolling:
use hot-rolled steel coils as raw materials, pickle and remove scale, and then carry out cold rolling. The finished product is hard rolled coils. The strength, hardness, and toughness of hard rolled coils increase due to cold hardening caused by continuous cold deformation. The plastic index decreases, so the stamping performance will deteriorate, and it can only be used for parts with simple deformation. Hard-rolled coils can be used as raw materials for hot-dip galvanizing plants, because hot-dip galvanizing units are equipped with annealing lines. The weight of hard-rolled coils is generally 6-13.5 tons, and the steel coils are continuously rolled at room temperature for hot-rolled pickled coils. The inner diameter is 610mm.
Relevant difference (Cold Rolled Steel & Hot Steel Coil)|
1. Appearance and surface quality:
Since the cold plate is obtained by the hot plate after the cold rolling process, and some surface finishing will be carried out at the same time, the surface quality (such as surface roughness) of the cold plate is better than that of the hot plate. It came well, so if there is a high requirement for the coating quality such as the subsequent painting of the product, the cold plate is generally selected, and the hot plate is divided into pickled plate and un-picked plate. The surface of the pickled plate is formed due to pickling. Normal metallic color, but it is not cold-rolled, so the surface is still not as high as the cold plate. The surface of the un-pickled plate usually has an oxide layer, black, or there is a black layer of ferric oxide. Generally speaking, it looks like it has been baked by fire. , and if the storage environment is not good, it will usually be embroidered.
2. Performance:
In general, the mechanical properties of hot plates and cold plates are considered to be indistinguishable in engineering, although there is a certain work hardening of cold plates in the cold rolling process, (but the strict requirements on mechanical properties are not ruled out. , then it needs to be treated differently), the yield strength of the cold plate is usually slightly higher than that of the hot plate, and the surface hardness is also higher, the specific way depends on the degree of annealing of the cold plate. But in any case, the strength of the annealed cold plate is higher than that of the hot plate.
3. Forming performance.
Since the performance of cold and hot plates is basically not too different, the influencing factors of forming performance depend on the difference in surface quality. Since the surface quality is better from cold plates, generally speaking, the same material Steel plate, the forming appearance effect of cold plate is better than that of hot plate.
Cold rolled coil is hot rolled coil as raw material, at room temperature, the highest grade EDDQ, the highest strength of 590MPa, has the advantages of high dimensional
accuracy, good surface quality, convenient processing, material saving and so on. It is widely used in home appliance industry, automobile industry, machinery industry,
construction industry, galvanized and other industries.
|
GRADE |
Yield Strength
RcL
Mpa |
Tensile strength
Rm
Mpa |
Elongation A80mm
% |
Impact test |
|
TemºC |
AkvJ |
|
SPCC |
≥195 |
315~430 |
≥33 |
|
|
|
Q195 |
≥195 |
315~430 |
≥33 |
|
|
|
Q235-B |
≥235 |
375~500 |
≥25 |
20 |
≥27 |
Some of our products:
Specification
The thickness is 0.2-4mm, the width is 600-2000mm, and the length of the steel plate is 1200-6000mm.
Grade
Q195A-Q235A, Q195AF-Q235AF, Q295A(B)-Q345 A(B); SPCC, SPCD, SPCE, ST12-15; DC01-06
Customer reviews
Application
Useage:
Widely used in general structural parts and stamping parts in construction machinery, transportation machinery, construction machinery, hoisting machinery, agricultural machinery and light industry and civil industries
Company Profile
Jinan Zunkai Group founded in 2002, with five branch companies and is well-funded. Our annual sales nearly one billion, about 300,000 tons steel.
Our company is located in Jinan City, Shandong Province. We entered into a strategic partnership with Bao Steel, Laiwu Steel, Rizhao Steel, Handan Steel, Anyang Steel, Maanshan Steel and other domestic large steel companies.
Zunkai is the largest steel agent in Shandong Province, we also have ourselves steel process factory with 100000 Square meter for steel laser cutting, surface treatment and other further processing , and our stock always more than 20,000 tons.
Zunkai Group mainly engaged in : PPGI ,galvanized steel , steel plate , round bar, steel pipe ,Stainless steel product ,angle bar, steel pile ,H beam ,I beam, angle, Channel flat steel etc .
Our good quality and reliable service will be your best trusted partner.
Sincerely wish to building long and regular business with you forever!!!
Customer Question & Answer
Q1 : What is your payment terms?
A1 : 30% deposit & balance against B/L or L/C at sight.
Q2 : What is your delivery time & loading port?
A2 : Generally it is within 7 days after received advance payment or L/C. If the goods is not in stock , according to the quantity
it is within 15 days. Loading port:QINGDAO or TIANJIN.
Q3 : Do you have MOQ request ? Can offer free samples?
A3 : Our MOQ is usually ONE ton. Free samples is ok but need pay thecourier charge. Charge can be deduct in future orders.
Q4 : What are your company's main products?
A4 : Our main products are Aluminum products, Steel products, Stainless steel products, Galvanized steel products, Colorized steel Coil, etc.
Q5 : Are you a factory or trading company?
A5 : We have both factory and trading company,own branch factory and warehouse in Shandong Province to provide you nice
goods with best price and good quality.
Audited Supplier 
){kind=link}
){kind=link}